Farine

Crazy for Bread

  • Home
  • About
    • FAQ
  • Recipes
  • Resources
    • BreadCrumbs
    • Other Bread Sites
    • The Grain Gathering
  • Artisans
You are here: Home / Artisans / Building a levain “à la Gérard” – Step 1

Building a levain “à la Gérard” – Step 1

Gérard sees pure levain (as he likes to call his starter) as the only way for a baker to truly personalize his bread: if he conducts his fermentation skillfully, no one will ever be able to reproduce the exact same taste. (I say “he” for short but Gérard counts many women bakers among his students and greatly admires them for their energy and resolve, and he is obviously talking about bakers in general).
The fact that a pure levain, defined by Gérard as “a culture of freshly ground organic grains, organic sea salt, and pure well water, patiently tended over several days”, cannot be exactly copied is what makes baking an art and the artisan baker a true artist. Every baker can and should experiment freely to find the aromas that will constitute his signature and Gérard takes great pride and delight in explaining how.
From a technical point of view, pure levain is not harder to make than a poolish for instance (a poolish being a mixture of 50% flour and 50% water fermented with commercial yeast in an amount which is inversely proportional to the duration of the fermentation). It is even easier because it is firmer. The wetter a ferment, the greater the risk to overshoot the acid threshold. To be able to control the type of acids one is looking for, the hydration rate cannot go over 50 to 60%. [Temperature is Gérard’s bakery hovers between 77 and 79ºF/26-27ºC]
I was curious to see if I could create and maintain a levain “à la Gérard” and as I was back in Vermont to work with him on a different project, he offered to show me how to start.
Frankly I was expecting the process to be exacting but a no-brainer since I would be working with an expert. But things never turn out the way we expect them to, do they? And I actually was in for a surprise (at step 3)… So was Gérard. But more on that in another post.

Gérard uses 30% of freshly milled flour (a blend of spring and winter wheat, spelt and rye) both in his final dough and in his levain. So in order to build a levain his way, you need to have access either to a small manual mill or to an electric one. Although he has a big electric mill for large amounts of grains, he prefers to use a small hand mill for the levain as the resulting flour is not only finer but also less hot (which means that more nutrients are preserved):

Manual grinder used by Gérard to mill flour for his levain
(Can be found online at Lehman’s Hardware – ref. 30347120, about $50)

For the levain formula, please click here.

To start making a levain à la Gérard, assemble all the ingredients (all-purpose flour, grain blend, salt, malt) and utensils (plastic scraper, parchment paper for weighed ingredients, thermometer, mill, bowl, plastic dough bucket, paper tape, pen), then weigh and aerate the all-purpose flour (unbleached) so that it is later more readily suffused with water:

Weigh the salt and the malt and set them on a piece of parchment paper near the bowl where the flours will be mixed with the water.
Mill the grain blend (for proportions, again please refer to the formula). Gérard insists on the importance of waiting until the last possible minute to mill the grains, in order to preserve the maximum number of wild yeast cells present in the grain. These cells are very volatile and disappear fast.

Take the temperature of the room and of the two flours and calculate the required water temperature, the desired temperature for the starter being 80 to 81ºF/27ºC:

In this clip, Gérard says the temperature of the freshly-milled whole-grain flour is 3 degrees warmer than that of the white flour. He doesn’t seem concerned, so I assume it’s fine.
Now comes the time to mix the flours and the malt (not the salt which is added after about one minute of mixing):

The flours are combined…

…and water is added:

Mixing begins and salt is added:

Gérard explains that a tension must be created on the skin of the starter.

Gérard says that the starter is ready when it begins to shine and becomes tacky.

When the starter is bouncy and the imprint of a finger remains visible, roll it into a ball, dust it with flour, flatten it into a disk which will fit at the bottom of the chosen container. For these proportions of flour and water, the disk should have a diameter of at least 7″, so the container needs to be selected accordingly.

…then place in a plastic container on a mixture of whole grains (again wheat, spelt and rye), coarsely milled to prevent light and air from filtering through.

Cover with another layer of the same mixture (the disc of starter must be entirely buried), close the lid tightly, stick a paper tape on it and jot down the date, the time and the temperature of the starter.

Let ferment for about 22 hours at 79ºF/26ºC.

Related posts:

  • Ask the Baker: Gérard Rubaud
  • Building a levain “à la Gérard”: Steps 2 & 3 and… a misadventure
  • Gérard Rubaud on working the levain
  • Gérard Rubaud: the movie (October 2011)
  • Meet the Baker: Gérard Rubaud
  • Revisiting Gérard
  • Rustic Batard
  • Shaping a batard/baguette: Gérard’s method

Share this:

  • Facebook
  • Pinterest
  • Twitter
  • Email
  • Print

Related

January 10, 2010 · Filed Under: Artisans, Gérard Rubaud · 34 Comments

« Ask the baker: Gérard Rubaud
Building a levain “à la Gérard”: Steps 2 & 3… and a misadventure »

Comments

  1. Carl says

    January 13, 2010 at 6:36 am

    Hi MC,
    Thank you for the wonderful and insightful levain building course with Mr. Gerard! It is amazing that bakers are very open and gracious to you, but whenever I visit a bakery, the owners would usually tell me to go away, or they don't have time for me. Oh well!

    I do have several questions for you during your recent visit to Mr. Gerard. For clarification…does he use bakers yeast in his bread dough? How fine was the flour that he milled? Was it smooth/fine like regular bread flour? After he put the levain in the container, did he keep the container in a warm area (80 F)?

    Reply
  2. Lazy baker says

    January 13, 2010 at 10:23 am

    Very cool!

    Reply
  3. Anonymous says

    January 13, 2010 at 1:05 pm

    Hi…
    You have me on the edge of my chair in anticipation! :?)
    Judd
    Packing day!

    Reply
  4. MC says

    January 14, 2010 at 3:28 pm

    Hello, Carl, Jeremy and Judd, thanks for your visit. In response to your questions, Carl, no, Gérard doesn't use any commercial yeast whatsoever. He mills his flour at the finest setting his mill offers but specks of bran are still visible, so it isn't as fine as regular/bread flour. I just bought an electric mill as well and only tried it once (last night to feed the levain). I noticed that at the maximum setting, my mill produces noticeable finer flour than his. Yes, he always keeps both the levain and the dough at about 80ºF.
    Hope this helps…

    Reply
  5. Teresa says

    January 16, 2010 at 5:50 am

    I am so glad I came across these posts on building the levain before they were buried in new posts.I will have to sign up for email notification! Thankyou MC,
    Teresa

    Reply
  6. MC says

    January 16, 2010 at 12:41 pm

    Teresa, I am so glad you visited.

    Reply
  7. Shiao-Ping 小蘋 says

    January 18, 2010 at 5:29 am

    Dear MC

    I cannot help but feel so moved as I was reading through each and every step which Gerard is showing you – such love, and such care. I am hopeless. I don't think I can go through your next post … (but I will). The man is unlike any other human being I've known. His love is in every step that he is showing the world (through you).

    Shiao-Ping

    Reply
  8. MC says

    January 19, 2010 at 12:52 pm

    Shiao-Ping, you make me smile. Yes, Gérard's love for his work shines through everything he does. I am in awe too.

    Reply
  9. MC says

    January 19, 2010 at 1:15 pm

    Cathy, many thanks for your kind words.

    Reply
  10. Anonymous says

    August 12, 2010 at 7:12 am

    Hi,
    would you please clarify the following.
    Prepairing a starter we isolate it with a mixture of whole grains "to prevent light and air from filtering through".
    What's the harmful effect of the air and light on the starter?

    Reply
  11. MC says

    August 13, 2010 at 1:11 pm

    It has been Gérard's experience that to maintain its integrity, the starter needs to develop in an aerobic and dark environment as both air and light would foster the formation of an outer layer on the surface of the disk. This layer would be oxidized and would look and taste differently.

    Reply
  12. Anonymous says

    August 19, 2010 at 7:27 pm

    Hi MC,
    thanks a lot for the answer.
    Also i'd like to clarify the following.
    What does it mean: 1st fermentation and 2nd fermentation? Is 1st fermentation = levain (which goes through three feedings, Gérard: "My bread is a three-levain bread.")?
    Is 2nd fermentation = final dough?
    Thanks in advance.

    Reply
  13. Mac says

    August 20, 2010 at 8:31 pm

    Hi MC,

    I was reading the recipe for starting a starter, and I noticed that spring wheat is used to increase the mechanical properties. What does Gerard mean by that? Do you know? Thanks.

    Mac

    Reply
  14. MC says

    August 21, 2010 at 12:37 pm

    Hi Mac, yes, actually I do. Spring wheat yields a stronger flour than winter wheat because it contains more gluten. It adds elasticity to the dough. But you don't want to use all gluten-rich flour either because at one point the dough becomes way too elastic and hard to work with. That's why Gérard uses a combination of grains.

    Reply
  15. Mac says

    August 21, 2010 at 6:24 pm

    Hi MC,

    Thanks for the response. Hmmm…I thought that using spring wheat would increase the wild yeast content, so the culture would increase in volumes. I don't suppose you have any hints on how to increase the contents of wild yeasts in a culture? The reason I am asking is because when I start a culture, it will double or even triple in volume, but after the third or fourth feedings, it will go dormant. I will keep feeding the culture for about 2 weeks and still nothing happens. Thanks.

    Reply
  16. Anonymous says

    August 21, 2010 at 7:18 pm

    Hi MC,
    does spring RYE also contain more gluten comparing with winter rye?
    Thanks

    Reply
  17. MC says

    August 22, 2010 at 12:07 pm

    @Mac, the behavior you describe sounds odd to me. Could you please email me a detailed description of how you feed and maintain your culture? Frequency and amount of feedings, temperature at which you keep it, type of flour, etc. I might be in a better position to help if I knew more.
    @Anonymous, I never heard there was a difference between spring and winter rye, gluten-wise. I don't even know that there is a spring rye and a winter rye. I'll try to find out. Rye containing much less gluten than wheat, I don't think it would make a perceptible difference in bread-baking.

    Reply
  18. Anonymous says

    August 23, 2010 at 7:35 pm

    Hi MC,
    thanks a lot for the answer.
    Probably tou can clarify folloowing.
    What does it mean: 1st fermentation and 2nd fermentation? Is 1st fermentation = levain (which goes through three feedings, Gérard: "My bread is a three-levain bread.")?
    Is 2nd fermentation = poolish? And what's the 'number' for the final dough — 3?
    Thanks in advance.
    My name is Ales by the way 🙂

    Reply
  19. MC says

    August 24, 2010 at 2:26 am

    Hi Ales, the first fermentation is the stage when the final dough ferments in bulk, the second, also called proofing, is the one which takes place after the dough has been divided and shaped. Like the levain, a poolish is a preferment. It is made with a portion of the yeast, the flour and the water which will go into the final dough. Gerard uses no poolish in his bread. I hope this answers your questions.

    Reply
  20. Anonymous says

    August 28, 2010 at 5:50 am

    Hi MC,
    and again another question.
    Gérard feeds his starter with the ratio of starter to the flour laying between 1/1 to 1/2.
    1. Does this ratio influence the starter's "strength"? In other words, would the starter be less strong if being fed 1/0.5? Or this ratio is only the point of fermrntation time?
    2. What factors determine the starter's strength? Is it depends only on the quantity of microorganisms or their QUALITY as well?
    Thanks,
    Ales

    Reply
  21. MC says

    August 30, 2010 at 12:40 pm

    Hi Ales,
    The ratio is important at the beginning. I would use the one Gerard has found works the best for starting a levain. In the final dough however the ratio can be adjusted according to room temp, humidity, etc. I know Gerard uses more starter in the winter and less in the summer for instance.
    Yes, of course, quality is very important and that's why Gerard uses freshly milled grains. Freshly milled grains contain a huge amount of wild yeasts as well as many nutrients.

    Reply
  22. Connie says

    December 2, 2011 at 9:08 am

    Hi Farine, I've read about the building of Gerard's levain. We can't get all the ingredients (different organic wheats) and I can't mill myself. But still I'm intrigued by your story on Gerard. He's in my head all the time. Even though I can't make the same levain, maybe I can do some of it. But, I really don't understand the formula (A – A3). Is A the start (step 1) and are A 1, A2 and A3 feedings? Do I trow away some or keep everything? Then I need a big container. So you see, I read it but still have questions. Hope you can help me to get a levain, not Gerard's but maybe better than no levain?

    Reply
  23. MC says

    December 2, 2011 at 7:52 pm

    Hi Connie, you want to get organic for the whole grains because the pesticides and other chemicals concentrate in the kernel. You certainly don't have to go organic for the white flour. If no organic flour is available, you may want to create your starter another way, using just white flour (unbleached of course) and water. There are many "recipes' for that in bread books or on the Web. A white starter is perfectly fine and can be deliciously aromatic if you make sure you don't keep it at too cool a temperature. But to come back to Gérard's formula for the levain, yes, A is the initial step (when you have no culture yet). A1, A2, etc. are the successive builds. And yes as well, you throw away all but the indicated amount of the culture each time you feed it. If you didn't do that, you would end up eventually with a truly gigantic container… Please let me know what you decide and how it turns out.

    Reply
  24. Connie says

    December 26, 2011 at 7:57 am

    Hi Farine, It took me a while, but this levain has been in my mind for days and days. I told you I don't have access to the organic whole grains to grained myself. That same afternoon my friend gave me 1 kg of organic wheat, grown here in Thailand. I don't have a grinder, but started to sprout the grains and after drying I grind them in my mortar and pestle. One gets creative. So, now I have sprouted malt.
    But, I am trying to make 'my own' levain. I have my regular 100% hydrated with all purpose flour. But now I also have a 65% hydrated with all purpose flour, rye,whole wheat bran and sprouted malt powder. The smell is great.
    As soon as 'my' bread looks like a nice bread, I will show it.
    I keep you posted, thanks for sharing Gerard's and you wisdom.

    Reply
  25. MC says

    December 26, 2011 at 6:27 pm

    Hello, Connie, your levain will likely be super active. Do you keep it in the fridge in between feedings? I can't wait to see your pictures. How I wish I could taste the flavors of this unique levain…

    Reply
  26. Marc Tayman says

    March 8, 2016 at 9:38 am

    Hello MC. – Thank you for all the great information! A quick question. Malt is mentioned in the ingredients for building the levain. Is that malt syrup or diastatic malt powder? I have both.

    Thanks in advance for your advice.

    Reply
    • mc.farine says

      March 18, 2016 at 8:47 am

      It is diastatic malt powder.

      Reply
  27. Simone Lindner says

    October 18, 2021 at 11:00 pm

    Hello MC,

    I wondered if you could please fix the link to Gerard’s levain formula? I followed it a number of years ago to make a starterand loved it very much, but have since lost the formula when my laptop died. It would be very much appreciated.:)

    Thanks so much!

    Reply
    • mc.farine says

      December 15, 2021 at 2:00 pm

      Hello Simone,
      I am just now seeing your comment. Sorry to say that I have lost the file… It is no longer in my google drive. If I ever find it again, I will contact you for sure. MC

      Reply

Trackbacks

  1. The 14 Steps of Bread Making – Bread Magazine says:
    June 23, 2016 at 4:50 am

    […] Building a Levain à la Gérard — Step 1 (Make sure to check out steps 2 and 3 as well) […]

    Reply
  2. The 14 Steps of BreadMaking – Wilsons Food says:
    June 23, 2016 at 6:13 am

    […] Building a Levain à la Gérard — Step 1 (Make sure to check out steps 2 and 3 as well) […]

    Reply
  3. Home milling: the Mockmill says:
    April 8, 2017 at 10:37 am

    […] more affordable hand grinder that could be bought from the Lehman Hardware’s catalog (see Building a levain “à la Gérard” – Step 1.) He sent me home with grains (wheat, spelt and rye) and I ordered the […]

    Reply
  4. New Year, New Starter | The Fresh Loaf - The Healthy Cooking Source says:
    January 11, 2019 at 3:53 pm

    […] made my last starter just under a year ago following Gerard Rubaud’s method as detailed in MC’s Farine blog. It requires a freshly milled organic blend of 60% wheat, 30% spelt and 10% rye at each daily stage […]

    Reply
  5. Meet the Baker: Gérard Rubaud says:
    May 14, 2021 at 9:22 am

    […] Building a levain “à la Gérard”: step 1 […]

    Reply

Leave a Reply to MC Cancel reply

Your email address will not be published. Required fields are marked *

Hello!

MC-Profile- 2013 - DSC_0934

My name is MC: formerly a translator,  now a serious home baker and a blogger. If you like real bread and love to meet other bakers, you are in the right place. Come on in...

Learn more →

  • Email
  • Facebook
  • Instagram
  • Pinterest
  • RSS
  • Twitter

Don’t want to miss a post?

Subscribe to Farine via email

Archives

Categories

Copyright © 2023 Farine · Design by Design Chicky Log in